About the GMSG11R0
The GMSG11R0 controller is part of the Graphite HMI Expansion Modules produced by Red Lion. Labeled within the Graphite HMI Brochure this controller is considered a Data Acquisition Module. This module has two strain gage inputs which operate at ±20 mV, ±33 V, and/or ±200 mV. The operation input depends on what operations the controller is performing. This control has control outputs which are described as relay outputs which have analog outputs of +/- ten volts or zero/four to around twenty milliamperes.
The GMSG11R0 controller is considered a Crimson control and allows for the expansion of the other graphite HMIs within this series. The Crimson control within the Red Lion series allows for programmable language which are structured text and instruction lists, ladder logic, and function block, these languages use develop logic codes such as remote telemetry units without added expenses. The Crimson software also allows for more established communications between not only HMIs but other connected devices used with the Graphite HMI Expansion modules.
While the GMSG11R0 controller can be found readily available on the market there is very little information available, some information can be found within the Graphite HMI Brochure which is attached above in the manuals tab. If you would like to purchase this model and would like to know the availability of this module please contact AX Control’s sales department for more information by email or phone number.