9905-033

About the 9905-033

Model 9905-033 from Woodward’s 2301A series is a high voltage reverse acting model with a 0-400 actuator current and an individual actuator. This control is not offered with a deceleration ramp. If connecting a series of controls to an individual actuator control does not diminish any of the other features that come with the 9905-033 model. If deciding to use a temperature limiting Woodward device it can be used with the load sharing and speed control or just the speed control model. 

When using the control if the circuit breaker auxiliary contact and droop contact are both closed the control is in isochronous mode, when the control is using the isochronous system the load-sharing-line relay is vitalized and the droop is deactivated within the system control.

While using the control if an error in which smoke begins to appear when the prime mover has initially been started check to make sure that the start fuel limit has been activated, if this has not been activated before the prime mover and control has been triggered bypass the fuel limit and then power up the control before starting the engine of the prime mover. 

AX Control Inc offers the 9905-033 model as well as others in the series if another part within the series needs to be used to efficiently use the prime mover contact us by phone or email for a quote and availability of the model.