9907-236

About the 9907-236

The 9907-236 is the Woodward Load Sharing and Speed Control or LSSC for short. It is capable of maintaining and processing Gas Turbines and Engine/Torque conversions. It comes equipped with a Magnetic Pickup. This connects the dual-speed control system, in doing so it makes sure that the actuator takes a positive position to ensure maximum fuel efficiency. The speed of the engine/ gas generation is maintained so that the rated speed limit is not passed. All the above-mentioned tasks would be poorly completed if there was a single control system being used, instead of a dual system control unit. Which resides in the 9907-236.

Some other things to note for the LSSC is that it operates between temperatures of - 40 to 85 C, or  -40 to 185 F. In addition it also has a Low idle speed of 55% rated, and its Droop is 0-10%. There are other specifications that enable the 9907-236 to perform its job. The LSSC also comes with a four-pole mini-switch that allows it to dictate the controlling speeds that are picked up by the MPU frequency. Internally there is also a vast assortment of auxiliary features. This allows power generation to be applied to the gas turbines which are normally restricted. Finally, the hardware that is needed for the 9907-236 in order for it to control a single prime mover and generator: A 2301A electronic control, A proportional actuator, and either a current or potential transformer capable of measuring loads handled by the generator. AX Control INC is more than willing to buy these parts, fix them should they break, sell them to you for your needs, and resell them as well.