9907-238

About the 9907-238

The 9907-238 is a dual system load control and load sharing operations, controller. It comes with an isochronous mode that is compatible to be used with a multitude of other capabilities. This can be used with the following moving speeds:

• Single-prime-mover operation

• Two or more prime movers

• Base loading against an infinite bus

Such options are desirable for both forward or backward applications, as well as single or tandem actuators. There are three different variations of actuators with varying ranges of high voltage models. Ranging from 20-40 Vdc, 88-132 Vac as well as 45-440 Hz. You also have the option to add on an additional deceleration ramp, when this ramp is in use there is an additional twenty seconds added when you start to ramp rated to being idle. When there is no ramp this happens instantaneously. 

Moving from ramps to power, to operate this machinery you can use a battery but it requires the use of an alternator or a different charging device. In addition a voltage source between 18-40  Vdc or 90 -150 Vdc. Finally when installing this product be sure to install it in an area that is well suited to the following requirements:    

• A sustainable source of ventilation 

• Adequate space to make repairs and conduct routine maintenance

• A location that will not exceed temperatures between -40 - +70 degrees Celsius or -40 - +158 degrees Fahrenheit.

• Mus not be secured to an engine. 

Please note that AX Control is able to Buy, Sell, as well as Repair such controllers and others like it.