8440-1801

About the 8440-1801

The 8440-1801 Woodward Inc easYgen-300 Genset Controller model is available for purchase at AX Control Inc. This specific model is also known as the easYgen-350-X model which when it comes to the voltage measuring and the mains it can be used in three-phase three-wire, one-phase three-wire, and one-phase two-wire versions. The control has status LEDs which indicate the operating stage of the control, LED seventeen on the control will indicate that the Genset controller has stopped, if LED twelve is just on and not flashing it indicates that the generator is on and operating properly. 

There are many different technical specifications for powering this control, one of them being the maximum power consumption within the control which is typically somewhere in the range of less than .15 W. Another technical specification for this device if you are using a main to measure frequency then the Hz for this main should be in the range of 40.0 to 85.0. The sinusoidal vibration on the control should either be 4 G or 5 to 10 Hz. 

When connecting the battery to the control the battery voltage should be in the range of 6.5-32 V and the accuracy of the battery voltage should be one percent. If you are looking at the dimensions of the control the dimensions are 158 mm by 158 mm by 40 mm. 

If you are interested in purchasing this control model you can contact our sales department by email at sales@axcontrol.com or by phone at (919) 372-8413.