8440-1831

About the 8440-1831

Part number 8440-1831 is manufactured by Woodward Inc under their easYgen-3000 Genset Controller series. The part is available here at AX Control Inc from our warehouse which contains new or refurbished controllers such as this one. If you are using your controller and have it set up to where it is being used in a multiple-unit mains application your unit as well as the other units it is connected to need to have the same signals for the release and reply of the MCB and signals for the mains voltage and current. 

Your controller is equipped with FlexIn technology which is able to provide three analog inputs which can be adapted to use with each sender type, those sender types are VDO, resistive input, and 0/4 to 20 mA.  The VDO senders are typically a 0-5 bar or 0-10 bar which operate at 40 to 120°C/50 to 150°C and are one-pole or two-pole grounds. 

The housing of your model is going to be made of plastic so be careful during installation so your controller does not take any damage. The dimensions of your control are going to be 282 mm by 217 mm by 99 mm, take the size as well as weight, which is approximately 2150 grams, into account when you are installing your controller. 

If you have any questions regarding control model 8440-1831 you can contact us by email or phone number to receive more information. If you have a surplus of this controller you can contact us through those same channels.