DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
Actuators Used | 4024, 512/524, and 1712/1724 |
Compliance | EU Directive |
Manuals | 50530, 04106, and 82329 |
Manufacturer | Woodward INC in Fort Collins, CO |
Series | EPG, Electrically Powered Governor |
System Battery Voltage | 12 or 24 Volts |
Woodward model 8290-215 is a speed control device that is no longer in production by the manufacturer. Even though it has been discontinued, it is currently available through AX Control. This device is in the Electrically Powered Governor series, and compliant with EU directives. It can work with a 12-volt or 24-volt system battery and is only compatible with certain types of actuators. This device works with actuator models 4024, 1712, 1724, 512, and 524.
The temperature range this device should stay in is from -40 to 167 degrees Fahrenheit. It uses a 10 A slow blow fuse, with a minimum magnetic pickup input of 1.5 VRMS. Model 8290-215 also operates with a start fuel limit, and can optionally be used with a ramp generator. Actuators that work with this device will have a rotation of 30 or 35 degrees. The workload for the device is around two pounds while the device itself weighs around one pound. When installing this product 12 AWG and 14 AWG should be used, and length maximums should be followed. The rated speed is set by a 25-turn potentiometer.
AX Control will buy, sell, and even repair speed control model 8290-215. Repairs and Purchases come standard with a three-year-long warranty.
The Woodward 8290-215 model is the best model to be used if the governor it is attached to does not need to be monitored. If you have any questions regarding this model feel free to reach out or browse the attached manuals. - AX Control Technician
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $1199 |
Our highly skilled technicians can repair your 8290-215. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved