5466-1049

About the 5466-1049

The MicroNet Digital Control module 5466-1049 is a TMR Kernel PS Module designed by Woodward Inc. The main power supply for this module is 24 VDC and will regulate it to 10 A or 5 VDC for the rest of the kernel section. Please note that when connecting the unit it must be matched to the type of CPU being used, the CPU used with the 5466-1049 module is the TMR5200 unit. If the model needs to be replaced all kernels within the MicroNet TMR Kerner Power Supply module must be removed before removing or installing all of the Kernel Power Supply modules. 

Most models have specific locations in which they can be located, the 5466-1049 unit can be used in 

• Class I Locations

• Division 2 Locations

• Groups A, B, C, and D Locations

• Non-hazardous Locations

On the front faceplate of the board, there is only one LED which will indicate the health of the module. The fault LED on the device will indicate whether or not the 5V or 5V precharge is functioning as needed. 

There are three different kernel sections A-B-C that contains one kernel power supply module each. The 5466-1049 module will be located in the first slot of the kernel sections. There are standards for each of the MicroNet Digital Controllers, this module has a CSA certification as well as a CE (EMC) certification. 

For any information regarding the Triple Modular Redundant (TMR) Kernel Power Supply module please refer to the 26167 which has all descriptions as well as environmental specifications needed to properly operate this unit.