About the 8571-102MH
This 8571-102MH Governor Control System product offering from the trusted Woodward manufacturer was originally, as mentioned above, made to exist as part of the PG-PL Series of governor products. In Specific, this 8571-102MH PG-PL product offering truthfully was made to exist as a "Pressure Compensated" Governor, which means that it almost certainly originally designed for more pipeline-based applications, as should have been indicated in the 8571-102MH Governor Control System instructional manual in the 8571-102MH PG-PL Governor manuals tab here just above.
Hardware Tips and Specifications
This 8571-102MH PG-PL Governor is followed online by a series of specific instructional manual materials that all point to the 8571-102MH PG-PL Governor product's standard assembly style. This 8571-102MH PG-PL Governor device makes use of other standardized PG-PL Control Series hardware components, including but not limited to its centrifugal flyweight head-pilot assembly, its power cylinder assembly or servomotor, its governed systems compensation system, and finally its unique yet standard speed setting mechanism that was developed and included specifically for governor speed that is fittingly described as pneumatic-style. As a Pressure Compensated style of Governor, one of the primary standardized hardware traits that have been accepted by this 8571-102MH PG-PL Governor style of Woodward motor would have to be examined as an oil pump with its corresponding standard storage area for oil under pressure purposes. The type of specific oil system for the 8571-102MH PG-PL Governor product is accompanied by a typical relief valve through which the maximum oil pressure of this PG-PL product can be lowered or stabilized.
This 8571-102MH PG-PL Governor product offering is really not surrounded by all too many originally-developed instructional manual materials online, or at least materials telling of its greater PG-PL Governor Series from the trusted Woodward manufacturer, as you could probably tell based off of the 8571-102MH PG-PL Governor basic standardized qualities section above. With this being the case, a diligent visual inspection of this 8571-102MH PG-PL Governor device itself becomes of paramount importance, as conducted by one of our experienced and passionate lead service technicians in-house here. For instance, this 8571-102MH PG-PL Governor device makes use of a metallic mounted plaque that describes a number of important 8571-102MH PG-PL Governor device classification qualities, including its 8571-102MH PG-PL Governor functional product number and description, its 679 to 800 RPM drive shaft speed rating, and its 15-3 PSI Control Air Pressure rating as well. Some of the other 8571-102MH PG-PL Governor qualities available upon visual inspection are its:
- Green metallic exterior chassis
- Standard manual adjustment dial
- Auxiliary Power Cylinder
This 8571-102MH Governor product offering from the trusted Woodward retailer is accompanied by an auxiliary component as pictured. While many other popular PG-PL Governor product offering's auxiliary product portion may jut out unnaturally from the normal assembly of this 8571-102MH device, it is sturdily attached and of a decent size, therefore not presenting the same snap risk as some of the PG-PL Series product offerings. This 8571-102MH device is warranty-protected upon any original purchase made here.
