About the 8520-385
This 8520-385 Governor Motor product offering is attributed to the major automated industrial manufacturer Woodward, as part of their UC Dial Governor product series that rather predictably exists with a number of UC Dial product offerings to be specific. This 8520-385 device's UC Dial Governor product series has a wide array of possible functional environments as described above, which means that this 8520-385 device and its greater UC Dial Series was designed to operate isyncronously despite any engine load. As according to this 8520-385 device's sparsely-available original instructional manual materials, the UC Dial Governor product series offers products with three differing available work output ratings, ranging from a UG-5.7 to a UG-10.
Hardware Tips and Specifications
This 8520-385 UC Dial Governor product offering is a typical UC Dial Governor product, and as such, is offered with a typical set of important yet standardized product hardware specifications. For starts, this 8520-385 device has a top maximum output shaft travel angle of forty two degrees for normative functionality. On top of this, this 8520-385 UC Dial Governor offers a standard incorporating of Speed droop for the purpose of the division and balancing of same-shaft or parallel unit loads. One other mentionable feature benefiting this 8520-385 UC Dial Governor product offering here would have to be described as its possession of a load limit control that was designed to curb the total amount of fuel through a strict hand on the governor output shaft so central to this 8520-385 UC Dial Governor device's functionality and structure. This 8520-385 UC Dial Governor product's load limit control also has important prime mover diagnostic functionality, as it has to power to turn it to zero when faced with calamitous or damaging functional fault conditions.
This 8520-385 UC Dial Governor device's standard UC Dial Governor Series product features are not the only things discoverable given its generally-low amount of specific original instructional documents online. For instance, a visual inspection of the 8520-385 UC Dial Governor product itself yields quite the bounty of valuable information, especially when conducted by one of our thorough and experienced machine service technicians in-house here today. One immediately-noticeable feature of this 8520-385 UC Dial Governor device would have to be claimed as its Manual Adjustment Dial, which is fittingly labeled as such through an apparent series of printed text on this 8520-385 UC Dial Governor device's metallic front-facing interface plate. Some of the other critical hardware qualities visible on this 8520-385 UC Dial Governor product's typical assembly are its:
- Standard level for mounting purposes
- Jutting lower Drive Shaft
- Compensation adjustment lever
