About the F2-4AD2DA
The F2-4AD2DA is a DL205 Analog Combination created by DirectLogic. This system may have also been sold by Automation Direct depending on the year it was produced.
The F2-4AD2DA is an analog current input/output module. It has several basic features including onboard resistors that are rated to provide overcurrent protection for 4-20mA loops, it needs less than 80mA of power from a 24VDC external power supply, and it has a removable terminal block that can be swapped out without actually needing to disconnect any wiring.
The F2-4AD2DA has 4 single-ended input channels and 12-bit resolution. It has 2 single-ended output connections. It has a 4-20mA range. It has a 10mc to 95% step response. It requires 16-point X Inputs and 16-point Y outputs. It is recommended that this device not be stored around corrosive gasses and be kept at -20 to 70 degrees Celsius. It needs a 24VCD, 80mA external power supply.
For more information about the product specifications of the F2-4AD2DA and its installation guidelines, please refer to the DirectLogic User’s manual and datasheets. If you have misplaced your datasheets, please let a representative from AX Control know and we will help to locate new ones for you if they are available.
If you have any questions about the F2-4AD2DA or its compatibility with your current DL205 setup, please don’t hesitate to contact us at AX Control. We are here to help you through the difficult process of system repairs. It is our primary goal to help make your repairs go as smoothly as possible.