About the IS5401
The In-Sight IS5401 Vision System features one 10/100 BaseT Ethernet port with an RJ-45 connector and one RS-232C port for serial communications. The breakout cable provides the connection for serial communications, power, trigger, and high-speed outputs.
The In-Sight IS5401 Vision System features Power, Network Status, and Network Traffic indicator LEDs. It also contains two user-configurable indicator LEDs.
Before you install the IS5401, consider that the device must be supplied with 24VDC plus or minus 10% power at 500mA or less.
The IS5401 contains 128MB non-volatile flash memory and unlimited storage through a remote network device. The image processing is 256 MB. The resolution is 1024x768. The sensor is ⅓-inch CCD. The weight is 350 g (12.3 oz.) with the lens cover installed and without the lens. The IS5401 features a die-cast aluminum housing.
The image bit depth of the In-Sight IS5401 Vision System is 256 grey levels (8 bits/pixel) at 17 full frames per second.
Operational specifications for the In-Sight IS5401 Vision System are provided in the following list.
-
While in operation the recommended temperature of the IS5401 is from 32°F to 113°F (0°C to 45°C).
-
While in the operating environment, the recommended humidity is 95%, non-condensing.
-
The Ingress Protection (IP) standard for the device is IP67. This applies when configured with the lens cover in place.
-
During shipping and storage the device is subject to vibration. The vibration rating as measured per IEC 68-2-6 is 10 G from 10 to 510 Hz with 150 gram lens installed.
-
As measured per the IEC 68-27 standard, the shock rating is 80 G shock with a 150 gram lens attached. This applies during shipping and storage environments.
The minimum firmware requirement for the IS5401 is In-Sight version 4.4.3.
