About the IS541100
Model number IS541100 was produced by Cognex Vision. This model is part of the In-Sight 5000 series of models and can be used with an intuitive user interface and remote network. During the operation of the IS541100 model, specific requirements are needed in regard to the firmware. The firmware that can be used with this unit without causing potential faults is In-Sight version 4.4.3. This firmware has been tested alongside this device containing all corrections and provides the most reliable operation. A later firmware version could potentially be used with the IS541100 model. If your device has a problem, the first step is always to update the firmware because the problem you are having might be resolved by the latest firmware installation.
While the IS541100 model is an addendum to the In-Sight 5000 series, it still functions the same as other models within the series. The model will still operate as a host vision system when connected to an In-Sight Network. The model will also operate as a camera to identify, align, inspect, measure, and guide applications. It will most often be used with applications directly on the factory floor. The interface IS541100 model will be configured to is an intuitive interface that allows for the remote monitoring of the vision system during the runtime of the unit. The model may also be controlled through remote user-defined custom applications through the In-Sight Native Mode commands to change the settings on the model as well as retrieve results.
