About the IS7230-01
IS7230-01 is a Cognex camera that is part of the InSight Vision System. This camera has 512 MB non-volatile flash memory and unlimited storage via a remote network device. The image processing memory is 256 MB SDRAM. The sensor ia a 1/1.8-inch CMOS sensor with a 5.3 mm diameter. The sensor is 5.3 x 5.3 µm sq. pixels. The camera resolution is 800 x 600 pixels. The electronic shutter speed is 16µs to 950ms. The acquisition is rapid reset, progressive scan, and full-frame integration. The bit depth is 256 grey levels at 8 bits/pixel. The camera operates at 102 full frames per second. The lens type is an M12 or C-mount.
There is no open ended, flying lead light cable in this series or in any series by Cognex. The Cognex light cable is a closed M12-to-M12 connector. The external lights that are supported by the In-Sight 7000 series include Di-Soric lights, QL series lights, Smart Vision Lights (SVL), and DVT Smart Lights. The light can be identified by its 119-xxxx part number or by its product ID. The internal ring light and the external light may be used at the same time. Set the knob on the Cognex light to H for High or L for Low signal strobe triggering. The user may set the external light settings by logging into the In-Sight 7000, selecting Sensor menu, and then selecting External Light Settings. The settings options for the external light are PNP and NPN.
