About the IS7400-11
IS7400-11 is a Cognex camera that is part of the InSight Vision System. This camera has 512 MB non-volatile flash memory and unlimited storage via a remote network device. The image processing memory is 256 MB SDRAM. The sensor ia a 1/1.8-inch CMOS sensor with a 5.3 mm diameter. The sensor is 5.3 x 5.3 µm sq. pixels. The camera resolution is 800 x 600 pixels. The electronic shutter speed is 16µs to 950ms. The acquisition is rapid reset, progressive scan, and full-frame integration. The bit depth is 256 grey levels at 8 bits/pixel. The camera operates at 102 full frames per second. The lens type is an M12 or C-mount.
A light is safe to use if the current is less than or equal to 500 mA. The external light does not come with intensity control. However, many lights have intensity/brightness controls on the light hardware. The camera trigger syncs all of the strobe outputs. The latency on the integrate ring light and light connector strobe signal is less than 100 us. There are different light color options contained in M12 lenses that are easy to configure with the In-Sight 7000. Only specific vendors produce light cables that can be used with the In-Sight 7000 camera. The user cannot connect the CIO-MICRO to use the HS OUT terminals to strobe an external light. Each external light has its own IP rating, which is listed in the specification sheet for that individual light.
