PA10T-133

About the PA10T-133

The PA10T-133 is one of several available rugged PA PowerStations from Parker.  This rugged compact HMI/PC is designed to be used in industrial settings as an operator interface.  The PA PowerStation line is available in sizes from 5 inches up to 15 inches; the PA10T-133 is a 10-inch VGA Color TFT display.  It is designed upon a  133 MHz x86 processor.  The unit uses a 4/4X NEMA rated enclosure and is  UL/cUL/CE approved.  

PA PowerStation units are designed with a Datalight ROM-DOS OS and a MachineShop shell.  CTC software provides backup copies.  

The PA10T-133 includes two serial ports available.  These allow communication with external devices at a rate of up to 115K baud.   The unit also includes an RS-232 COM port and an RS-232/RS-422/RS-485 configurable port.  Configuration can be changed using DIP switch settings located on the side of the PA. 

The PA10T-133 does not include any type of USB port. However, the unit will accept a serial mouse or a serial printer.  The unit also includes a keyboard/mouse port that is compatible with IBM AT-compatible keyboards.  

The PA10T-133 has a display brightness of 200 NIT and a viewing angle of 70 degrees left, right, and down.  The viewing angle is limited to 40 degrees upward.   The PA10T-133 requires a cutout of 12.6 inches by 9.86 inches and mounts quickly using the integrated clips.  The HMI weighs approximately 8.4 pounds without the addition of any kind of shipping material or exterior boxing. 

Original manuals or user guides from Parker should be reviewed before any kind of maintenance, modification, or installation procedure is begun.  These documents will provide additional important information.