About the PA200V-135
The PA200V-135 is one of several PA2 PowerStation push-button power replacement industrial computers created by Parker. These units were designed to be a more advanced replacement for the PA PowerStations. They typically can be dropped into cutouts for these earlier models with little to no changes. However, the PA200V-135 is one of two versions of the PA2 series that does not have a display; instead, it has an extra analog VGA output connector that will allow the user to connect to an external VGA monitor.
The PA200V-135 is designed to offer reliable and consistent use. It has multiple ports including an ethernet port, two USB ports, and two serial ports.
The PA200V-135 is designed to mount within an enclosure. There should be a minimum of two inches between the unit and the sides of the enclosure on top, bottom, and sides. This allows proper airflow around the unit. The PA2 should be mounted flat. While the unit has been tested to comply with international emission and electromagnetic standards, users should ensure there is a good earth connection by utilizing the grounding stud on the rear of the PA200V-135. The unit can be used in temperatures from 0 to 50 degrees Celsius in 5-95% humidity, non-condensing.
The PA200V-135 is 6.05 x 4.12 x 2.52 and weighs approximately 2.0 pounds before boxing. Most of our in-stock products that are ordered before 3 pm are typically shipped out on the day of order placement. If you require expedited shipping, please let our staff know. We work with several different world-wide carriers to offer you multiple shipping options.
