About the 590S/0350/6/1/4/00
The 590S-0350-6-1-4-00 from Parker Eurotherm is a DC Link series drive. This is one of the many available models typically in stock here at AX Control. The 590S-0350-6-1-4-00 is a DC drive that has been configured with a 3-phase 4 quadrant converter up to 720 amps.
The 590S-0350-6-1-4-00 is designed to provide overload protection and electronic control of motor speed, torque, and acceleration/deceleration. The unit has a thyristor bridge and can be operated in a single direction of rotation.
The 590S-0350-6-1-4-00 includes multiple standard features including field regulation, phase rotation insensitivity, on-board fuse protection, feedback options, and 16-bit microprocessor control. It has a main machine interface that includes a display and a keyboard that is located near the top of the drive. The brightness of the display is controlled by a contrast potentiometer located inside the drive behind the control door. Nearby there is also a tachometer generator board, test points, fiber optic connectors, and a calibration card.
The 590S-0350-6-1-4-00 should be installed so it can dissipate heat. Make sure clearance is left on the sides of the drive to allow for proper cooling. The unit should not be mounted near or on equipment that will cause the drive to overheat. The maximum ambient operating temperature for this unit is 55 degrees Celsius.
Additional information about this drive can be found through original documentation from Parker Eurotherm. This includes manuals and user guides. Please refer to and read through these before beginning any installation or maintenance procedure. AX Control typically ships in-stock orders a few hours after your purchase order is processed, Monday through Friday.
