About the 620L 0007 400 0010 UK ENW 0000 000 B0 000 004
The Eurotherm 620L 0007 400 0010 UK ENW 0000 000 B0 000 004 Vector Drive enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The 620L 0007 400 0010 UK ENW 0000 000 B0 000 004 Vector Drive has a user interface panel. It has a 2-line display, 10 function keys, and indicator LEDs.
There are four function keys. The Menu key enables you to select the menu level indicated on the display. ESCAPE enables you to select the last menu level. UP enables you to navigate options. DOWN enables you to navigate the menu options.
There are five command keys. LOCAL/REMOTE press this key to toggle between the local and remote modes. PROG enables you to return to the main User Interface menu. It enables you to perform programming functions from the local mode. FORWARD/REVERSE changes the direction of the motor. JOG causes the motor to run at jog speed. Jog speed is a predefined motor speed. START causes the motor to start. STOP causes the motor to stop.
The function keys provide information on the general status of the device.
Before you start the 620L 0007 400 0010 UK ENW 0000 000 B0 000 004 Vector Drive for the first time you must perform a few tasks to ensure your safety and the safety of persons around the device, and that you will not damage the components of the device, or cause damage to the surrounding area.
