About the 620L 0015 400 0010 US ENW 0000 000 B0 000 000
The Eurotherm 620L 0015 400 0010 US ENW 0000 000 B0 000 000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
Before you install Eurotherm 620L 0015 400 0010 US ENW 0000 000 B0 000 000 you must plan for certification. UL certification applies to installation in the United States. CE certification applies to installation in the European Union. One requirement for UL certification is motor overload protection. The installer or the local inspector must determine if the motor overload protection is in compliance.
Another consideration for UL certification is circuit and short circuit protection. This takes the form of fuse cartridges and the fuse current rating.
The installation of the Eurotherm 620L 0015 400 0010 US ENW 0000 000 B0 000 000 only requires a few tools and doesn’t take a long time to perform. However the planning requires you to consider several factors.
Have a space planned for the installation. It might be a wall or other structure. It also has to have all electrical power in the right position for the device for proper cable routing. It also has to be cool. It cannot have another device running on the other side that generates heat that also heats the wall. The space also has to be well ventilated. If the space is enclosed you might need to provide a vent and a fan that forces air circulation. However, if the space is open it might be sufficient to allow the free flow of air.
