About the 620L 0150 400 0010 UK ENW 0000 000 B0 000 004
The Eurotherm 620L 0150 400 0010 UK ENW 0000 000 B0 000 004 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The Eurotherm 620L 0150 400 0010 UK ENW 0000 000 B0 000 004 contains a full range of inputs and outputs. Five analogue inputs (four are programmable). Two programmable analogue outputs. Digital input for control panel control of the motor in local mode at 24V. Three programmable digital outputs at 24V. Two-pin or four-pin connectors for RS-485 connections. Also, a 24V DC power supply is available. And a +10V DC and -10V DC power supplies are available.
Several labels are visible to provide important information for installing, operating, and maintaining the device. The nameplate label has the model number, serial number, and catalog number. If you need to call for service or for help, have the information on that label in front of you. The fuse replacement level has the fuse type. This label is near the location of the fuses. Refer to this label before you replace the fuses.
The terminal tightening label describes how tight to make the terminal connections. Do not overtighten the terminals to avoid damage to the terminal or other components. It is recommended to use a torque wrench to ensure you do not over tighten the terminals.
