About the 620L 0450 400 0010 UK ENW 0000 000 B0 000 000
The Eurotherm 620L 0450 400 0010 UK ENW 0000 000 B0 000 000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The serial connection can be used to enable the Eurotherm 620L 0450 400 0010 UK ENW 0000 000 B0 000 000 to communicate with other drives and also to communicate with a laptop to perform configuration parameter functions using a configuration tool. You can download a new configuration, upload a configuration, or dump all configuration files.
If you are unable to communicate with the laptop using a serial port there are troubleshooting steps you can take. Make sure each port is assigned a unique address and make sure that the serial port is not disabled. Make sure there are no compatibility issues between the devices. Also, observe that the correct port is connected to the serial cable. Try to reset the connectors on the laptop and the device.
There are several topics to consider before you install the Eurotherm 620L 0450 400 0010 UK ENW 0000 000 B0 000 000 concerning the control circuits and the software. Together the control circuits and software control the motor and operation of the device. Input signals provide feedback on the speed of the motor, temperature, and other factors. The processor uses this information to control the device to meet the parameters set for the device. The output signals can slow down, speed up, or reverse the motor.
