About the 620L-0055-400-0010-UK-ENW-0000-000-B0-000-000
The Eurotherm 620L-0055-400-0010-UK-ENW-0000-000-B0-000-000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
A wall is a suitable location for installing the Eurotherm 620L-0040-400-0010-US-ENW-0000-000-B0-000-000 Vector Drive, or any vertical surface. It must be a sturdy surface that can withstand the weight of the device.You drill holes in the back plate of the device and hang the device from screws or bolts attached to the wall. The holes in the panel and the hardware in the wall must match exactly to mount the device.
Only a few tools are needed for installation. For example, socket wrench, screwdrivers, wire cutter, and torque wrenches.
The Eurotherm 620L-0055-400-0010-UK-ENW-0000-000-B0-000-000 must be mounted in a cubicle and in some location the cubicle must be enclosed with a door that opens only with a tool.
For this reason it is important to plan for ventilation. The device generates heat while operating and if the heat cannot escape the device will easily overheat. This might cause an overheat condition which stops the motor from operating. The device must have free movement of air around the device. The device is designed for air to move from the bottom of the unit and escape from the top. Make sure other devices, bundles of cables, or other equipment do not block the flow of air.
If the device is in an closed environment, you must install a vent and fans to exhaust the heat.
