About the 620L-0300-400-0010-US-ENW-0000-000-B0-0000-000
The Eurotherm 620L-0300-400-0010-US-ENW-0000-000-B0-000-000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
Operating the Eurotherm 620L-0300-400-0010-US-ENW-0000-000-B0-000-000 is designed to be easier with the features provided by the control panel. The operator can stop, start, reverse the motor direction, cause the motor to spin forward, and perform other commands to have control on the device. The operator can monitor the status of the device and view diagnostic data. The operator can edit the parameters of the application program.
However, before starting the 620L-0300-400-0010-US-ENW-0000-000-B0-000-000 for the first time, a checklist must be completed. This is a final checklist to verify the installation is right to avoid damage to the device and all components, other devices in the immediate area, and to protect the health and safety of all operators and all others in the surrounding area.
Installation includes cabling the device to the main electrical supply. The first check is to verify that the voltage on the main power cable is correct. You must also check the auxiliary power supply too. Too much voltage would cause damage to the motor and other components. Too little voltage would lead to unreliability, under performance, or damage.
Wiring of the power, control, motor, and earth connections are a vital part of installing the device. Pull on the connections and verify that they are securely attached to the terminals. Visually inspect the insulation and verify that it is intact and that the insulation is not frayed
