About the 620L00074000010
The Eurotherm 620L00074000010 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The ease of installation enables you to quickly start using the Eurotherm 620L00074000010. You only have to secure the device to a wall, wire the power, control, earth, and communication cables. Then test the operation for safety and functionality.
Another feature of the 620L00074000010 is the ease of maintenance. Down time is minimal and service costs are low.
First, you only need to have on hand some basic hand tools. For example, screwdrivers, wrenches, and torque wrenches. Also it is best practice to have the routine maintenance performed by qualified individuals only. The 620L00074000010 is engineered for low maintenance because of the solid state design. That is, all the electronic controls are solid state boards for long life and low maintenance.
Locate the fuse label near the fuse panel and note the type of fuses the device requires. The label also defines the schedule for fuse replacement. Access the fuses and replace all the fuses with fuses of the same type and voltage. It is best practice during maintenance to check all electrical contacts. That is, pull on the wires and makes sure none are loose. Make sure you see no insulation that is frayed or bare.
The motor during operation is subject to vibration so check the bolts that hold the components in place to make sure they are tight. Tighten any that seem loose.
