About the 620L00074000010USENW0000000B0000000
The Eurotherm 620L00074000010USENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
Ease of installation and low maintenance are features on the Eurotherm 620L00074000010USENW0000000B0000000. And the installation can be performed quickly with just a few common hand tools by a qualified individual. Planning before the installation for ventilation, and cable routing will help minimize problems with the installation. Keep all cables clear of the top and bottom of the device to allow air movement.
It is best practice however to perform a complete, detailed, and exhaustive check before starting the device. The main and auxiliary power supplies must be the right voltages and it is important to check them before startup. Powering the device with the wrong voltage might damage components or be a safety hazard to individuals, or other devices in the surrounding area.
The specifications the Eurotherm 620L00074000010USENW0000000B0000000 are provided on labels on the device, and other information and documentation that comes with the device. Note the information about the armature voltage current rating for the motor and make sure that it matches the requirements of the installation.
With the assistance from installers, electricians, or engineers who are familiar with the device and the installation, check all cables used for powering and controlling the device. Motor cables and ground cables must also be checked. Are the cable connections secure? Do you see any frayed insulation? Are they the right gauge and type. Check the terminal connections with a torque wrench, is possible.
