About the 620L00224000010UKENW0000000B0000000
The Eurotherm 620L00224000010UKENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
One important feature of the Eurotherm 620L00224000010UKENW0000000B0000000 is the control panel, which enables the operator to control the behavior of the device using keys on the keypad. This is performed in the local control mode. You can stop the motor, and make the motor rotate in forward motion or reverse motion. You can choose to use a Run speed or Jog speed. These are speeds that are defined in parameters that are set in the application program.
The operator can program the drive in remote control mode. The operator can move through the series of menu options that help the user set the parameters. One set of menus enables you to configure the serial communication settings. Another set of menus enables you to define the motor configuration settings. The diagnostic parameters are available on another menu. The keys on the keypad are used to move up and down from one parameter to another within a menu, return to the previous menu, and perform other actions.
The menus and parameters display on the two-line display on the control panel while in remote control mode. The product code for the device and a welcome message are displayed on the two-line display when the device is started. Also when you first start the device, the keypad is in remote control mode. When in local mode, the remote control keys are not functional. When in remote control mode, the local mode keys are not functional.
