About the 620L00554000010USENW0000000B0000000
The Eurotherm 620L00554000010USENW0000000B0000000 enables speed control of induction motors with an encoder. It also provides for a co-processor and ports for a fibre optic communications network.
The components of the Eurotherm 620L00554000010USENW0000000B0000000 are subject to damage the first time you start the device. It is best practice to access the motor and spin the motor with your hand. If you find the motor is jammed and cannot spin freely, carefully inspect the motor and determine the cause. It might be that during installation a piece of wire, small hardware parts, dirt, or other debris became lodged in the motor. Remove anything you can see of that nature until the motor spins freely.
Inspect all cooling fans that have been installed for the 620L00554000010USENW0000000B0000000. Make sure they can spin freely and that air can move through the fans without obstruction.
Visually inspect the device and all components for signs of damage. Look for dents, scratches, and other signs of rough treatment. Determine if the damage is likely to have affected the performance of the device.
Confer with all individuals that are working on other parts of the manufacturing system. Verify that the power up procedure will not adversely affect their work or productivity. Also follow all procedures to make them aware of the safety hazards inherent in the power up procedure.
Also, other manufacturing equipment might be in the general area of the device. It is best practice to take steps to ensure the other equipment is safe from damage.
