About the FRN0.75G11S-2JE
The Fuji Electric FRN0.75G11S-2JE is a three phase general purpose inversion drive. A member of the Frenic 5000 G11S series, this drive can be applied in a number of production and factory settings. Dynamic torque vector control allows the device to intelligently determine the motor power required for individual loads. Nominal applied motors rate at 0.75kW. From the source it can accept between 200 and 230 VAC, with a frequency of 50/60 Hz. A maximum voltage of 240 VAC can be sustained by the inputs. Output voltages rate from 200 to 230V with a frequency range of 0.1-400 Hz.
Remote usage of FRN0.75G11S-2JE is possible with the detachable keypad panel. An LED 4 digit display and an LCD monitor provide users with all system status updates. Six language functions are integrated into the design, allowing for universal usage. Applications of this unit range from sanding machines and automatic doors to crushers and shredders.
Manufacturer provided installation and storage parameters should be followed to prevent any damages to the device. FRN0.75G11S-2JE is housed in a NEMA 1 enclosure, providing some protections from indoor environmental concerns. Temperature sensitivities dictate that the drive be stored in a controlled facility. When operating, ambient temperatures should fall no lower than -10℃ (14℉) and raise no higher than 50℃ (122℉). Even if the device is not operating, storage temperatures can affect the output of the drive. Acceptable storage temperatures range from -25℃ to 65℃ (-13℉ to 149℉). A complete installation guide is available in the Frenic 5000 series manual as well as the device datasheet. Technical support for this drive and its series was originally provided by Fuji Electric.
Our knowledgeable staff at AX Control is happy to help with all of your automation needs. Please contact a member of our sales team to receive current prices on all available parts and repairs.
