About the FRN0.75G11S-4
FRN0.75G11S-4 is a three phase inversion drive developed by Fuji Electric. This inverter is a member of the Frenic 5000 G11S series of controllers. Integrated dynamic torque vector control calculates the motor power needed for a specific load, increasing the drive’s accuracy and effectiveness. The nominal applied motors for this drive rate at 0.75kW. Inputs on this unit accept an input voltage range of 380 VAC to 480 VAC with a frequency of 50/60 Hz. Output voltages range from 380 VAC to 460 VAC with a frequency range of 0.1 to 400 Hz.
The keypad found on the faceplate of the drive is detachable, allowing for remote operation of FRN0.75G11S-4. The keypad is complete with a four digit LED screen as well as an LCD monitor display. Six languages are programmed onto the keypad, allowing for international use. This drive can be applied to a number of production line uses, including cranes, presses, packing machines, and water treatment systems.
Fuji provided a complete list of safety and installation parameters to protect both the drive and the user. Sensitivities of FRN0.75G11S-4 require that it be housed in a controlled climate. Ambient temperatures while operating can range from -10℃ to 50℃, or 14℉ to 122℉. Storage temperatures can also affect the device and should be monitored accordingly. Safe ranges fall from -25℃ to 65℃, or -13℉ to 149℉. Refer to the Frenic 5000 manual and the device datasheet for a complete installation guide. Fuji Electric was the original technical support provider.
AX Control’s friendly and knowledgeable staff is available to assist with all of your automation needs. Please contact our office to receive current prices on all parts and repairs.
