About the FRN020G11S-4UX
FRN020G11S-4UX is a three phase inversion drive developed by Fuji Electric. A member of the Frenic 5000 G11 series, this general purpose inverter is designed to work in a number of factory and production jobs. System integrated dynamic torque vector control performs calculations to intelligently determine the motor speed required for the needs of individual loads.
This inversion drive has a registered motor output of 20 horsepower. Accepted input voltage ranges for the FRN020G11S-4UX measure from 380V to 480V with a frequency of 50/60Hz. Output voltages vary from the input ranges, with the inverter capable of producing 380V and 460V with a frequency range of 0.1Hz to 400Hz. The maximum sustained output voltage this drive can produce is 480V.
General purpose drives like FRN020G11S-4UX can be used in a number of production applications, like elevators, presses, and crushers. By removing the keypad found on the front of the drive, this device can be used remotely. Nine soft keys, an LED screen, and an LCD monitor are all found on this detachable keypad.
To prevent damages to the device, follow installation and safety parameters provided by the manufacturer. FRN020G11S-4UX should only be mounted in a climate controlled indoor facility. Ambient temperatures in operating facilities should fall no lower than 14℉ (-10℃) and no higher than 122℉ (50℃). The device datasheet as well as the G11 series manual provides a complete installation and safety guide. The manufacturer, Fuji Electric, was the original provider of technical support.
AX Control’s friendly and knowledgeable staff is available to assist with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.
