About the FRN1.5G11S-4
The Fuji Electric FRN1.5G11S-4 is a three phase general purpose inversion drive from the Frenic 5000 G11 series. Job applications for this device range across a number of production and factory settings. Roles such as shredders, flow pumps, and drilling machines benefit from inverters like this. Motor speeds of this unit vary based on calculations performed by the onboard dynamic torque vector control.
FRN1.5G11S-4 features nominal motor speeds of 1.5kW. Outputs produced by the drive can range from 380V to 460V, though the maximum voltage output the device can withstand is 480V. These outputs are accompanied by a frequency range of 0.1Hz to 400Hz. Voltages inputted from the source can rate from 380V to 480V with a frequency of 50/60Hz. A keypad found on the front of the drive can be removed to allow for remote operation of the device.
Parameters outlined by the manufacturer should be followed for proper device installation and function. FRN1.5G11S-4 is housed in a NEMA 1 enclosure, making it suitable for indoor installation only. Operating facilities should maintain an ambient temperature no lower than -10℃, or 14℉, and no higher than 50℃, or 122℉. To find a complete guide to installing the drive, refer to the series manual as well as the device datasheet. Fuji Electric was the original technical support provider for the Frenic 5000 series.
The knowledgeable sales staff at AX Control is available to assist with all of your automation needs. Please contact our office by phone or email to receive current prices on all parts and repairs.
