About the FRN2.2G11S-4
FRN2.2G11S-4 is a three phase inversion drive from the Fuji Electric Frenic 5000 G11 series. A general purpose inverter, this device can seamlessly blend into a number of factory and production line applications. Machinery such as vacuum pumps, cranes, presses, and elevators can all be used with this general purpose drive. Motor speeds are intelligently calculated based on individual load requirements by the integrated dynamic torque vector control system.
Nominal speed ratings for the driver’s motor rate at 2.2kW. FRN2.2G11S-4 produces an output voltage range of 380V to 460V that includes a frequency range from 0.1Hz to 400Hz. This drive can produce a maximum sustained output voltage of 480V. Source inputted voltages can rate from 380V to 480V with a 50/60Hz frequency. User access is a design feature of this drive, with remote access possible. By removing the detachable keypad found on the drive, this inverter can be operated remotely.
Parameters outlining important storage and installation instructions should be followed to ensure the device does not incur any accidental damages. As it is housed in a NEMA 1 enclosure, FRN2.2G11S-4 is only suitable for installation indoors. Operating facilities should be climate controlled to ensure the device functions as efficiently as possible. Ambient temperatures should be maintained no lower than -10℃ and no higher than 50℃. For complete instructions on installing and operating the drive, refer to the series manual as well as the device datasheet. The manufacturer, Fuji Electric, was the original technical support provider for this device.
Our seasoned sales team at AX Control is happy to help with all of your automation needs. Current prices for all parts and repairs is available by calling or email a member of our staff.
