About the FRN30G11S-4CX
FRN30G11S-4CX is a three phase inversion drive from the Fuji Electric Frenic 5000 G11 series. Inverters from this series are general purpose machines, capable of integrating into a number of factory applications. Jobs including pumps, supplies, presses, and conveyors can interact with this drive. A 30 kW drive, it intelligently controls motor speeds based on load requirements calculated by an integrated dynamic torque vector control system.
Monitoring voltage levels to and from the inversion drive can ensure that the device is operating within its prescribed bounds. FRN30G11S-4CX can input sourced voltage levels from 380V to 480V with an accompanying 50/60Hz frequency. Produced outputs from the drive can range from 380V to 460V, with a maximum sustained output voltage of 480V. A range of frequencies from 0.1Hz to 400Hz can accompany these outputs. A remote operation option is built into the drive. The keypad is detachable, allowing for remote access to the drive.
Device function is dependent upon all manufacturer provided installation parameters being followed. A climate controlled indoor facility is the ideal housing for FRN30G11S-4CX, which is only protected by a NEMA 1 enclosure. The production line or factory should maintain ambient temperatures no lower than -10℃ (14℉) and no higher than 50℃ (122℉). Reference the device’s datasheet as well as the series manual for a complete guide to installing the inverter. Fuji Electric originally provided technical support for this drive and its series.
The friendly and knowledgeable staff at AX Control is ready to help with all of your automation needs. Please contact a member of our sales team to receive current prices on all parts and repairs.
