About the FRN7.5G11S-4EN
The Fuji Electric FRN7.5G11S-4EN is a 7.5kW inversion drive from the Frenic 5000 G11 series. As a general purpose drive this device can be used in a variety of factory and production applications. Jobs involving machinery like shredders, drills, presses, and cranes can all benefit from the motor power of the drive. An integrated dynamic torque vector control system intelligently calculates the motor speeds needed for individualized loads.
Maintaining the device requires monitoring voltage levels found in the device. FRN7.5G11S-4EN can source an input voltage between 380V and 480V with a 50/60Hz frequency. Output ranges for this inverter parallel input voltages, with normal outputs producing between 380V and 460V. The maximum voltage the inversion drive can produce rates at 480V. Outputs are accompanied with a varying frequency between 0.1Hz and 400Hz.
FRN7.5G11S-4EN includes manufacturer provided installation and safety parameters that should be met to ensure device protection. The outer protective layer of the drive rates as a NEMA 1 enclosure, making indoor installation the only suitable operating environment. These facilities should be climate controlled to maintain ambient temperatures no lower than 14℉ (-10℃) and no higher than 122℉ (50℃). Please refer to the series manual as well as the device datasheet for a complete installation and operation guide. Technical support for this inverter and its series was provided by the original manufacturer, Fuji Electric.
Our knowledgeable and friendly staff at AX Control is available to help with all of your automation needs. Please contact our office by phone or email to speak to a member of our sales team about all parts, repairs, and prices.
