About the TP-G9S-UX
TP-G9S-UX is a replacement keypad developed for inversion drives from the Frenic 5000 G9S series. On the G9S drives, these keypads provide users with remote operation capabilities. From the detached terminal, users can remotely operate and program the connected drive. The keypad can be easily removed from the front plate of the drive. Simply loosening the screws that support the plate allow easy access to the keypad itself.
A number of features are highlighted on the terminal. TP-G9S-UX operates as a programming terminal for the connected inversion drive. A large four digit LED screen provides users with hertz (Hz), amps (A), and voltage (V) readings. Below, an LCD programming screen provides users with interfacing capabilities for the drive. Eight softkeys complete the drive, including operational buttons like RUN and STOP. A PRG (program) key, RESET key, shift (>>) key, a FUNC/DATA key, and up/down keys are also found on the device.
Maintaining the operating G9S drive will ensure that the keypad is functioning properly as well. When the drive is installed on a factory or production line, a controlled climate is required. Operational temperatures should reach no lower than -10℃ (14℉) and no higher than 50℃ (122℉). Installation and operational parameters for the keypad can be found in the series manual as well as the datasheet. Technical support for the entire G9S series was provided by the original manufacturer, Fuji Electric.
Our competent and knowledgeable sales staff at AX Control is available to assist with all of your automation needs. Please contact our team to receive current prices on all parts and repairs.
