About the TPC-G11S
The TPC-G11S is an Inverter Operation Panel manufactured by FUJI Electric in the G11S series. This operation panel features nine pushbuttons on the front panel. The icons on these pushbuttons include: PRG, SHIFT >>, RESET, up, down, FUNC/DATA, FWD, REV, and STOP. The TPC-G11S has a screen to indicate the mode (forward, reverse, stop, rem, loc, comm and jog) in addition to other important information for the operator. Some of the other values presented on the screen include Hz, A, V, %, r/min, m/min, kW, X10, and X100. The front panel on the module is secured by two screws, one in the upper left corner and another on the bottom right corner. If the operator must remove the back plate of the panel, this can be done by removing the four screws located in the four corners of the back plate. The operation panel serves as the interface between the inverter and the operator. See the manual for your G11S series for further information on programming, set up, and maintenance. It is, however, important to never install your TPC-G11S panel while power is applied to the inverter. Doing so may result in damage to the equipment, user, or both.
