About the FRN007P11S-2UX
The Fuji Electric FRN007P11S-2UX is a three phase inversion drive from the Frenic 5000 P11 series. Drives in the P11 series are designed to operate an array of pumps and fans in factory and production settings. Pumps for all purposes, like sludge, water, and vacuum, operate efficiently when powered by inversion drives. System accuracy and efficiency is an integral design feature of this drive. An onboard dynamic torque vector control system intelligently determines the motor output required by an individual load. This drive is capable of producing up to 7 horsepower.
Monitoring voltage levels of the device will protect it from accidental damages, prolonging the life of the drive. Sourced input voltage the FRN007P11S-2UX can sustain measure from 200V to 230V, with a 50/60Hz frequency. Voltage outputs produced by the inverter can measure as low as 200V and as high as 230V. The maximum output voltage the device can produce measure at 240V. A frequency range from 0.1Hz to 400Hz accompanies all outputs of this device.
Device longevity requires that all provided installation and storage parameters are followed. As it is housed in a NEMA 1 enclosure, FRN007P11S-2UX requires a climate controlled indoor installation environment. Factories and production lines should maintain ambient temperatures no lower than 14℉ (-10℃) and no higher than 122℉ (50℃). For a complete review of installation and storage procedures, refer to the series manual and the device datasheet. The manufacturer, Fuji Electric, was the original technical support provider for this device.
Our knowledgeable sales team at AX Control is happy to help with all of your automation needs. To receive current prices on all parts and repairs, please contact our office by phone or email.
