About the FRN015P11S-4UX
FRN015P11S-4UX is a three phase inversion drive from the Fuji Electric Frenic 5000 P11 series. Inverters from this series were developed to operate with fans and pumps in a factory or production line setting. Pumps operating with water, vacuums, and a host of other applications can be powered by drives like this. This drive is capable of outputting up to 15 horsepower, but these motor speeds can be altered. An onboard dynamic torque vector control calculates the exact output required by an individual load.
Voltage levels in FRN015P11S-4UX should be monitored to ensure that the drive is operating within its limits. Sourced voltage inputs to the device can measure from 380V to 480V with a frequency of 50/60Hz. Output voltages produced by the inverter can rate as low as 380V to as high as 460V. The maximum voltage this device can output rates at 480V. Frequency ranges for outputs produced from this device measure between 0.1Hz and 400Hz.
Following proper storage and installation parameters will ensure that FRN015P11S-4UX operates within its physical limits. A climate controlled indoor facility is required to house this drive as it is housed in a NEMA 1 enclosure. When operating on a production line or in a factory, these spaces should maintain ambient temperatures between -10℃ and 50℃ (14℉ and 122℉). The device datasheet as well as the series manual contains a complete guide to installing and operating the inverter. Fuji Electric, the manufacturer, was the original technical support provider for this device.
AX Control’s knowledgeable and friendly sales staff is available to assist with all of your automation needs. To receive current prices on all parts and repairs, please contact a member of our team by phone or email.
