About the FVR0.4E11S-4
The FVR0.4E11S-4 is an inverter belonging to the Frenic FVR Series by Fuji Electric. This module requires a three-phase, 400 Volt power supply voltage with a rated nominal applied motor of 0.4 kW. This terminal has an M4 terminal size. This size indicator means that the FVR0.4E11S-4 is 106 mm wide, 130 mm high, and 126 mm deep. It has an input current of 0.82 A with a DCR, an input current of 1.8 A without a reactor, and an output current of 1.5 A. please note that when this input voltage is at or above 300 Volts, the inverter can be operated continuously. However, if the input voltage drops below 300 Volts, the inverter can only be operated for 15 ms. An additional braking unit for the FVR0.4E11S-4 is unnecessary. However, if the user decides to install a braking resistor, use the DB0.75-4. Only use one unit for a total ohmic value of 200 Ω. The maximum braking torque for the FVR0.4E11S-4 can go up to 150% of the rated braking torque. When operating at 50 Hertz, it can withstand 4.02 N-m or 3.32 N-m when operating at 60 Hertz. This inverter has a carrier frequency that has a generating loss of 28 W (low 2kHz) or 45 (high 15kHz). The FVR0.4E11S-4 has an application rage that is specifically for compact, general industrial machines. It has a standard enclosure. This terminal requires a DCR4-0.4 reactor type which is 66 mm wide, 90 mm high, and 94 mm deep with a mass of 1.0 kg.
