About the 193X268ABG01
The 193X268ABG01 is what is known as a rectifier card. This is a type of printed circuit board or PCB. The 193X268ABG01 was developed to be a part of the 193x series by General Electric or GE.
The 193X268ABG01 is a very small printed circuit board or daughter board. A daughter board is a card which can be added to another larger circuit board to expand the board’s functions. This board is so small that it does not contain very many components. A terminal block is featured at the bottom of the 193X268ABG01. This terminal block contains five (5) small metal terminals which are silver. In the center of the 193X268ABG01, there are four (4) large silver capacitors. The capacitors are stacked on top of each other in pairs of two (2). Two (2) metal pieces are sitting on each side of the capacitors for a total of four (4). One (1) resistor is situated below these capacitors. The resistor is brown with bands that are brown, orange, white, and red. Directly above these capacitors on the circuit card, there are five (5) small metal components. These metal components are labeled with letters such as P, S, R, and T. These are also labeled with the word COM. This small circuit card has UT15 written on the card. On the other side of the card, the number 801 is written. Also printed on the card near this number are the words TEST CLS. The device’s part number, 193X268ABG01, is printed on the surface of the card.
