About the 193X269ACG06
The 193X269ACG06 is a type of printed circuit board or PCB. This printed circuit board was produced by General Electric or GE for the 193x series.
The 193X269ACG06 is a small printed circuit board with a variety of small components. On one (1) side of the 193X269ACG06 printed circuit board, there is a large black wire. This wire is attached to the surface of the 193X269ACG06. The wire features a metal connector piece at the end as well as a red portion. One (1) large silver component is featured on the left side of the 193269ACG06 printed circuit board. This large silver component is connected to the PCB with a silver metal wire. Several brown resistors can be seen on the surface of the 193X269ACG06 printed circuit board. Many of these are large and a few are smaller. These resistors all contain bands which are yellow, purple, red, white, brown, black, gold, green, and blue among other possible colors. The colors of the bands on each resistor of the 193X269ACG06 signify each component’s resistance. Five (5) of the brown banded capacitors are large and the remaining four (4) are small. The 193X269ACG06 contains four (4) capacitors. These capacitors are medium sized and solid yellow in color. The part number and resistance capacity of each of the yellow capacitors is printed on the outside of the component in black print. Twelve (12) small diodes which are grey with a red stripe are aligned in rows on one half of the 193X269ACG06. Twelve (12) metal jumper pins can be found in a line on one edge of the 193X269ACG06. One (1) more jumper pin is located on the opposite side.
