About the 193X381ACG01
The 193X381ACG01 is what is known as a meter board. This is a type of printed circuit board or PCB. The 193X381ACG01 was made by General Electric or GE as a part of the 193x series.
The 193X381ACG01 is a large rectangle shaped circuit board with many different electronic components. A large plate has been attached to the top of the circuit board which features a large meter and other large components. The large meter is situated at the top of the plate. This meter uses measurements from zero (0) to at least twenty (20). Directly below this meter is a switch which is labeled as SELECTOR RANGE. This switch may be adjusted from 1 TO 10 and from 11 TO 20. Below this switch, there are three (3) knobs which may be adjusted as needed. One of these knobs is red and the other two are black. The black knob in the middle features the numbers eleven (11) through twenty (20). These knobs are attached to the surface of the PCB with white wires. At the bottom of the plate, there is another switch which is labeled as SCALE. The meter on this plate is used to measure a transformer on the opposite side. This transformer is identified with the part number 104X117CB004. The part’s label also contains TYPE 185 and 0/100 UA. Many various components are positioned on the lower parts of the 193X381ACG01. Many resistors which are either blue or beige with multi-colored bands can be found on the board.
