About the 193X461AEG01
General Electric created the 193X461AEG01 regulator circuit board as a part of the Speedtronic 193x series. This part is a type of printed circuit board (or PCB) made by GE.
The 193X461AEG01 is a large PCB with many different electronic circuit components. Three (3) LEDs or light-emitting diodes which are red are featured near the lower left corner of the printed circuit board. Along the right side of the board, there are two (2) small LEDs. One of these diodes is green and the other is red. Two (2) additional LEDs can be found near the top left of the 193X461AEG01, one of which is yellow and one which is green. Many yellow capacitors are located on the printed circuit board. These capacitors are positioned in various places throughout the board. They are all labeled with their part numbers and their voltages. Eight (8) blue capacitors are located mostly on the right half of the PCB. Three (3) of these capacitors are large while the other five (5) are much smaller. Three others capacitors are featured on the PCB which are silver and have one red end. A number of integrated circuits may also be found on the 193X461AEG01. There are nine (9) integrated circuits in total. Seven (7) of these are larger while the remaining two (2) are about half the size. The 193X461AEG01 contains many small metal jumper pins. The jumper pins are divided into six (6) different groups which are positioned in various places on the board.
