About the 193X488ADG01
The 193X488ADG01 is a printed circuit board which was produced by General Electric or GE for the 193x series. This is a sort of printed circuit board or PCB. The 193X488ADG01 is a what is called a regulator card.
The 193X488ADG01 is a very long printed circuit board which is rectangular. Eleven (11) blue components which are shaped like squares can be found on the edges of the 193X488ADG01. Nine (9) of these blue components are lined up along the card’s left edge. These square components are identified as RF, MINF, V/HZ, CLST, VB, DTIM, ATIM, CLIM, and IRC. The remaining two (2) blue components are positioned on the bottom edge of the 193X488ADG01. Many yellow capacitors which come in varying sizes may be seen all over the 193X488ADG01. Two (2) large yellow capacitors are featured on the left side of the 193X488ADG01. These capacitors are labeled with a voltage of two-hundred volts (200V). A series of medium-sized capacitors are located all around the 193X488ADG01, as well as many small yellow capacitors. Approximately twenty-five (25) of these yellow capacitors are situated throughout the 193X488ADG01. Two (2) other medium-sized capacitors which are silver in color can be found on the right half of the 193X488ADG01. Six (6) integrated circuits have been placed on the 193X488ADG01. Two (2) silver transistors which are circular have been placed near the top of the center part of the 193X488ADG01. A collection of other transistors which are smaller than the others and black are attached to the 193X488ADG01 printed circuit card.
