About the 193X528ACG01
General Electric or GE developed the 193X528ACG01 to be a part of the Speedtronic 193x line. This product is a printed circuit board or PCB. The 193X528ACG01 is a Valutrol Interface board.
Many various small components are featured on the 193X528ACG01. One (1) potentiometer, also known as a variable resistor, is located at the top of the board directly in the center. Along the opposite (lower) edge of the PCB, there is a series of small metal pieces aligned in a row. There are thirty-two (32) of these metal pieces in total. Each part features a different label. These pieces may be used to connect the 193X528ACG01 to other parts in the system. One (1) large resistor which is black on the outside and silver in the middle is located on this PCB on the right half. A number of others capacitors which are yellow and small in size can be found all over the board. Much of the area on the 193X528ACG01 is covered in small solid black resistors. Several resistors which are brown and covered in multicolored bands can also be seen on the PCB. These bands may be red, brown, white or others colors. The bands represent the resistance of each device. Many small black transistors have been placed on the board as well as a few silver transistors which are larger. There are four (4) of these silver transistors on the 193X528ACG01 in total. Near the center of the 193X528ACG01, there are several small diodes which are solid grey.
