About the 193X531ABG01
The 193X531ABG01 is a Valutrol DC drive diagnostic card. This part is a component in the 193x series designed by GE or General Electric. The 193X531ABG01 is a small printed circuit board or PCB.
The 193X531ABG01 is a long, slim printed circuit board (PCB). This PCB has one (1) large component on each end. These components are made of silver metal and contain blue bases. One (1) small switch is situated on the upper edge of the 193X531ABG01. This switch is made of silver metal and it has a red base. This component may be switched between DIAG STAT on the left and DIAG RUN on the right. Several small metal components are featured on the upper edge of the 193X531ABG01. These are labeled in white print as CFB, -20V, RSET, COM, CRM, MAC, +20V, FDR, LR and more. There are eleven (11) of these components in total. A number of transistors which are small and black are positioned on the 193X531ABG01. These transistors are half-circle shaped. Nine (9) transistors like this are situated on the 193X531ABG01. The 193X531ABG01 contains many small resistors. These resistors are brown in color and they contain bands which may be silver, red, grey, and yellow. One (1) yellow capacitor which is medium to large in size can be found close to the center of the 193X531ABG01 printed circuit board. Two (1) short black wires may also be seen on the 193X531ABG01. These short wires are identified with the reference designators 1J and 2J. The GE symbol, as well as SV-1 and the part’s number, are printed on the surface of the circuit board.