About the 193X536AAG01
The 193X536AAG01 is what is called a Valutrol DC drive card. This is a type of printed circuit board or PCB. The 193X536AAG01 was developed by General Electric or GE for the 193x series.
The 193X536AAG01 is a very small printed circuit board or daughter board. This PCB can be attached to a larger circuit board to add functions to the larger card. Four (4) metal pieces are located at the top of the 193X536AAG01 printed circuit board. These pieces are identified by the labels SYS, +20V, COM, and -20V in blue writing. At the top of this card directly below these metal pieces is a large yellow capacitor. This yellow capacitor is the largest component on the 193X536AAG01 circuit board. Several resistors are featured on the 193X536AAG01 card. Four (4) solid grey resistors are situated in different areas. Each of these resistors is labeled with its part number. Two (2) other grey resistors are sitting on the left side of the 193X536AAG01. These resistors are covered with bands that are brown, black, red, orange, green, and purple. Three (3) brown resistors are positioned on the 193X536AAG01. These resistors have bands which are silver, brown, light purple, red, and yellow. Two (2) small solid brown resistors are featured on the 193X536AAG01. One (1) grey resistor can be found on the 193X536AAG01 which is attached to the PCB with a long black wire. One (1) light blue resistor which contains bands that are green, blue, red, black, and brown. This small light blue resistor is also connected to the 193X536AAG01 with a black wire.
