About the 193X543ABG02
General Electric developed the 193X543ABG02 board as a time delay relay card. This device was manufactured for the 193X series of replacement drive boards. As it is a member of this replacement series, this card can be applied to a number of GE brand drives and exciters. When it is installed, the card provides a set of identical relay channels to the board. Both of the relays found on the board can be set to activate on a time delay. AX Control maintains a large on-hand supply of GE FANUC replacement parts.
Installing this card provides the drive with two time delay relay channels. Output relays from the 193X543ABG02 board can be sourced using either a +20V, a -20V, or a 115 VAC input signal. Onboard relays are developed with a time delay function. Delays can be adjusted over three time ranges between 0.1 seconds and 60 seconds. An external power supply rated at ±20 Volts is required for relay energization. Both relays consist of a 24 VDC coil and four (4) form C contacts. When relays are energized, light-emitting diodes on the card will illuminate. When inputting 115 VAC, the card features a pilot duty rating of 0.8 amps of inrush current and 0.18 amps of holding current.
Review any provided installation parameters before beginning to install the board. The risk of damage to the device is lessened when these are met. Since energized relays are sent through the board, only permit qualified personnel to install the 193X543ABG02 relay card. A complete guide to wiring this board is available in the device’s datasheet as well as the series’ manual. General Electric originally provided technical support for this card.
AX Control’s knowledgeable and trusted sales staff is available to speak with you about all of your automation needs. Please call or email our team for pricing on the 193X543ABG02 relay card, as well as any other part or repair.
