About the 193X643ABG222
The 193X643ABG222 is a type of printed circuit board. This product was developed by General Electric or GE. The 193X643ABG222 was made to be a part of the 193x series by GE.
The 193X643ABG222 is a large rectangular circuit board which features a variety of electronic circuit board components. At the top of the PCB, there is a series of fifteen (15) large metal jumper pins. Two (2) adjacent pins may be connected using a jumper. This may alter the operations of the PCB. One (1) large inductor or coil is situated right below these jumper pins. An inductor is a coil of wire which is typically covered by some sort of material. A large metal piece is sitting on top of this inductor which is labeled with its part number. The inductor is connected to the PCB with a pair of green wires. Another large circuit board component is positioned on the left side of the 193X643ABG222. This is a rectangular component which is attached to the 193x board with a series of eight (8) black wires. Two (2) yellow capacitors which are large in size may be seen near the bottom left corner of the 193X643ABG222. These yellow capacitors contain their part numbers and voltages in the components’ surface with black letters. Situated next to these capacitors is a large fuse. The fuse has a white label in the center and is bound on the ends by two silver metal pieces. The designators of all of the parts on the 193X643ABG222 are listed on the PCB along with the full part number which is printed at the top.
